LISTING PHOTOS Click photo to enlarge One of the pair of wrought iron gates The pair of gates and some of the fixings The top scrollwork The catch and receiver The hinged side of one of the gates   Page Views: 3560 Date Added: 17/01/2005 Last Updated: 17/01/2005 Price: £100.00 Description: A Pair of Rather Attractive Traditional Heavy Duty Wrought Iron Gates to suit an opening approximately 2.80m These gates are very good quality and heavy, made in the early to mid 1950's, they are generally in very good condition but really need stripping and painting. The frames on both of the gates are slightly bent on the hinged side, (the right hand gate is worse) this could, I am sure, be straightened and sorted out with a lump hammer or sledge hammer prior to repainting. The gates both open inwards with the left hand one opening first, viewed from the outside. The perimeter frames are 25mm x 15mm with the scrolls and additional uprights made of smaller sections. They are complete except for the angle and steel tube to receive the first gate and drop bolt. The set consists of the following two gates complete with latch and drop bolt, two top hinges, two bottom hinges and two retainers to hold the gates in the open position. The bottom hinge is offset so that the gates will close automatically under gravity once released from the retainer. They will also work on a slightly rising drive due to the offset hinges which cause the latching sides of the gates to be higher than the hinged ends when they are open. For more information go to the web link, if you need further information please call. City: Leighton Buzzard County:   Beds Country:   United Kingdom Contact person:   Julian Brown Phone: 07765 241 332 Web-site: http://homepage.ntlworld.com/julianb/gates.htm View Map: Click Here to view E-mail: Reply to Ad

Average Visitor Rating:    0.00 (out of 5)
Number of Ratings: 0 Votes